3000M Long Distance DC 12V 2CH RF Wireless Remote Control Switch System ,Transmitter - Receiver,315 #N7 X-HX0111A

3000M Long Distance DC 12V 2CH RF Wireless Remote Control Switch System ,Transmitter - Receiver,315

سوج واير ليس 2 جنل بمدى عالي يصل الى 3000 متر في المناطق المفتوحة 
يعمل على جهد 12 فولت وبتردد 315 ميكا هرتز 

يتوفر بسعر 25,000 دينار 


Specifications:
Control Lights, TVs, Motors, Fans, Cameras, Video signals, Audio signals, electrically operated Doors/ Locks/ Windows.
 
1.Transmitter
 
Channel: 2 CH
Remote Control Distance:0-3000 M  ( Ideal Distance without any block and signal interfere , it would rise and fall about 10%-90% with the block and signal interference.) 
Encode: PT2262
Frequency:315
Size: 150mm x 42mm x 26mm
Power Supply: 1 X 6F22 9V Battery (NOT included)
 
2.Receiver
 
1)Toggle/Self-Lock: Press->On; Press again->Off
press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).
2)Latched/Inter-Lock: Press->On; Press other button->Off
press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).
3)Momentary/Jog: Press and hold->On; Release->Off
Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )
 
(Original Setting is  Momentary,can change it by yourself.)
 
Decode: Fixed code, soldering
Power Supply (Operating Voltage): DC 12V 
Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC
Work Voltage Range of Relay: AC 110-240V or DC 0-28V
Sensitivity:-105 dBm
Operating Temperature:-40'C~+80'C
Current:Standby≤10mA,Working ≤80mA
 
3.Package Included
 
1 x Receiver (with cover)
1/2/3 x Transmitter (no battery inside)
 
4.Learn code and Remove Code
 
1). Learn:press the learning button .the indicator from  on to  off  ,press key A,the indicator flashes and turns off .it means key A learning is successful.
 
press the learning button .the indicator from  on to  off  ,press key B,the indicator flashes and turns off .it means key B learning is successful.
 
2).Remove :press the learning button about 5-8 seconds , the indicator turn on to off , it means the Code has been removed successfully.